FREEPHONE 0800 849 2211

Secure fastening through double strain relief with Icotek Banner
Secure fastening through double strain relief with Icotek

The new EMC cable clamps are an ideal solution for the reliable earthing of cable shields including a double strain relief. 

The cables are strain relieved above and below the shield connection, thus, the cable shield is not used for strain relief and therefore not damaged – as recommended by the PROFINET installation guidelines.


  • Large clamping areas
  • No damage of the cable shield
  • Double strain relief acc. DIN EN 62444
  • Large contact area

New types – new assembly possibilities

The EMC shield clamp LFZ-M|MSKL is now available as 45° and 90° angled version!

The 45° angled type is suitable for the use in frequency converters from various manufacturers. Thus, the cable can be inserted in a 45° angle into the wiring duct.

For the cable routeing and strain relieving on edges the 90° angled type can be used.

Make an Enquiry

Fill out our online form.